{"product_id":"jeep-jk-0-3-inch-lift-front-tera30-axle-w-4-10-r-and-p-and-arb-07-18-wrangler-jk-teraflex","title":"Jeep JK 0-3 Inch Lift Front Tera30 Axle w\/ 4.10 R and P and ARB 07-18 Wrangler JK TeraFlex","description":"\u003cp\u003eTeraFlex JK Front Tera30 Replacement Axle Housings include a heavy-duty housing with axle tubes, bracketry, and forged inner knuckles, pre-installed inner seals and upper control arm bushings as well as ARB air locker, Spicer ring and pinion, Spicer bearings and install kits, TeraFlex HD ball joints, and factory yoke.\u003c\/p\u003e\n\u003cp\u003eSimply swap over axle shafts, outer knuckles, outer axle assembly, unit bearings, brakes and sensors. The comprehensive assembly makes swapping axle housing a true DIY process!\u003c\/p\u003e\n\u003cp\u003eTeraFlex heavy-duty JK Front Tera30 Replacement Axle Housings are perfect for replacing bent, broken, or damaged front axles in JK Wrangler and Rubicon vehicles. Can also be used as a direct bolt-on upgrade for JK Wrangler owners looking to beef up the front axle's weak areas.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: 3503410\u003c\/li\u003e\n\u003cli\u003eLift Height: 0-3 Inch\u003c\/li\u003e\n\u003cli\u003eWidth: 67 Inches WMS-WMS (stock)\u003c\/li\u003e\n\u003cli\u003eAxle Tube: 3.25 Inch x 0.25 Inch\u003c\/li\u003e\n\u003cli\u003eRing and Pinion: 4.10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJK Wrangler (2-door) - front\u003c\/li\u003e\n\u003cli\u003eJKU Wrangler Unlimited (4-door) - front\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eARB air locker\u003c\/li\u003e\n\u003cli\u003eSpicer ring and pinion - 4.10\u003c\/li\u003e\n\u003cli\u003eSpicer bearings and install kits\u003c\/li\u003e\n\u003cli\u003eTeraFlex HD ball joints\u003c\/li\u003e\n\u003cli\u003eFactory yoke\u003c\/li\u003e\n\u003cli\u003eSold As An Assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and Benifits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3.25 inch O.D. x 0.25 inch wall axle tube increases strength to resist bending and torsion w\/ minimal weight increase\u003c\/li\u003e\n\u003cli\u003ePre-installed inner axle seals\u003c\/li\u003e\n\u003cli\u003eForged HD inner knuckles w\/ greater upper and lower section strength\u003c\/li\u003e\n\u003cli\u003eDuctile cast iron housing w\/ increased rib gussets\u003c\/li\u003e\n\u003cli\u003eHD ductile iron differential cover\u003c\/li\u003e\n\u003cli\u003eAsymmetric housing design, for extra-long tube side strength\u003c\/li\u003e\n\u003cli\u003eSmooth radius bottom design to glide over rocks and obstacles\u003c\/li\u003e\n\u003cli\u003eIntegrated lower flexarm skid plates\u003c\/li\u003e\n\u003cli\u003eBottom oil drain hole for simple fluid changes\u003c\/li\u003e\n\u003cli\u003ePremium UV protected triple-stage powdercoat process for superior corrosion resistance\u003c\/li\u003e\n\u003cli\u003e1\/4 inch thick CNC laser cut axle brackets for extreme strength\u003c\/li\u003e\n\u003cli\u003eIntegrated factory location upper control arm mount\u003c\/li\u003e\n\u003cli\u003ePre-installed upper control arm bushings\u003c\/li\u003e\n\u003cli\u003eReinforced front track bar mount (ties into spring pad) for greater strength\u003c\/li\u003e\n\u003cli\u003eProper pinion angle for Lifted JK applications\u003c\/li\u003e\n\u003cli\u003ePre-tapped hole on spring perch for bump stop extensions\u003c\/li\u003e\n\u003cli\u003ePre-drilled holes for limit straps and lower spring retainers\u003c\/li\u003e\n\u003cli\u003eRetains all JK ESP, ABS, and speedometer sensor capability\u003c\/li\u003e\n\u003cli\u003e100 percent engineered, designed, and built in the USA\u003c\/li\u003e\n\u003cli\u003e100 percent new components\u003c\/li\u003e\n\u003cli\u003e1-Year \/ Unlimited Mileage Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Time: 6 Hours\u003c\/li\u003e\n\u003cli\u003eThis is a very heavy item and must be shipped by freight truck\u003c\/li\u003e\n\u003cli\u003eBelow is a list of Requirements and Recommendations for TeraFlex axle housings as budget and build preference allows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequirements and Recommendations\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eControl Arm Upgrade:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0-3 Inch Lift: This axle is a direct bolt-on upgrade! Although stock control arms will work at this Lift height, aftermarket flexarms may be used if desired - highly recommended with a 3 inch Lift.\u003c\/li\u003e\n\u003cli\u003eFront upper (P\/N 1252200) and front lower (P\/N 1252000) TeraFlex JK Sport Flexarms will work w\/ 2.5-3 inch Lifts.\u003c\/li\u003e\n\u003cli\u003eFront upper (P\/N 1415520) and front lower (P\/N 1415500) TeraFlex JK adjustable Alpine Flexarms will work w\/ 2.5-4 inch Lifts.\u003c\/li\u003e\n\u003cli\u003eFront upper (P\/N 1315520) and front lower (P\/N 1315500) TeraFlex JK adjustable Alpine Long Flexarms will work w\/ 3-6 inch Lifts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAxle Shaft Upgrade:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0-6 inch Lift: High-quality aftermarket axle shafts will enhance your set up. We recommend RCV or TEN Factory high-end shafts. Stock Rubicon axle shafts may also be reused.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAxle Shaft Tube Seal Upgrade:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0-6 Inch Lift: Get serious with HD 0.5 inch wall seals (P\/N 4354050) or keep it real with standard 0.25 inch wall seals (P\/N 4354025). Stock seals may also be reused.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSteering System Upgrade:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0-3 Inch Lift: The JK HD Tie Rod and Drag Link Steering Kit (P\/N 1853900) will do the trick, though the stock steering system may be reused.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBrake Upgrade:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0-6 Inch Lift: Experience a notable difference w\/ a TeraFlex Big Brake Kit (P\/N 4303400 or P\/N 4303420) or JK Big Rotor Kit (P\/N 4303480 or P\/N 4303490)\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Teraflex","offers":[{"title":"Default Title","offer_id":39869761060941,"sku":"3503410-FNNT","price":4789.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0552\/0696\/9421\/products\/3503410-FNNT.jpg?v=1664311156","url":"https:\/\/underdogmotorsports.com\/products\/jeep-jk-0-3-inch-lift-front-tera30-axle-w-4-10-r-and-p-and-arb-07-18-wrangler-jk-teraflex","provider":"Underdog Motorsports ","version":"1.0","type":"link"}