{"product_id":"jeep-jk-sway-bar-front-and-rear-combo-for-07-18-wrangler-jk-manual-option-swayloc-offroadonly","title":"Jeep JK Sway Bar Front and Rear Combo For 07-18 Wrangler JK Manual Option SwayLOC OffRoadOnly","description":"\u003cp\u003eThis item is for both a Front and a Rear Swayloc for Wrangler JK. SwayLOC is the original dual-rate sway bar that provides different control rates for off-road and on-road use.\u003c\/p\u003e\n\u003cp\u003eSwayLOC improves balance and control while providing full articulation during off-road use. It also delivers near OEM ride quality during on-road use that is more firm than the stock sway bar.\u003c\/p\u003e\n\u003cp\u003eThe dual rates are achieved through the use of two concentric torsion bars. SwayLOC uses a simple latching mechanism to easily change between off-road and on-road use without having to struggle with disconnect links or having to be on level ground.\u003c\/p\u003e\n\u003cp\u003eThe proven cam latching system guarantees that SwayLOC engages in the correct position for on-road use and disengages for off-road use when chassis flex releases pressure on the latch.\u003cbr\u003eThe Manual Flip a Lever version is simply that, flip the lever on the latch rearward sets the latch to disengage for low off-road resistance. Turning it off sets it to engage for high on-road resistance.\u003c\/p\u003e\n\u003cp\u003eThe spring in the latch allows you to select the operation by flipping the lever and the spring will pull the latch open or slide engaged when it should.\u003c\/p\u003e\n\u003cp\u003eThe remote-controlled version works using an air operated latch (1). The latch is controlled by an in-cab switch. Turning on the lighted in-cab toggle switch automatically sets the latch to disengage for low off-road resistance.\u003c\/p\u003e\n\u003cp\u003eThis kit comes with mounting brackets which mount to the side of the frame encompassing the 2 mounting bolts for the rear bumper side mounting bracket.\u003c\/p\u003e\n\u003cp\u003eThere is some drilling required to add the remaining hardware to mount. The torsion bars are positioned above the frame rail, in the void space between the jack storage compartment and the rear tool box\/sub-woofer compartment.\u003c\/p\u003e\n\u003cp\u003eThe arms come forward and linkage attaches to the same tab on the rear axle as the stock rear sway bar.\u003cbr\u003eIf your Jeep is heavy, or have a rack on the roof, this will help drastically in controlling the body roll of the JK.\u003c\/p\u003e\n\u003cp\u003eThe rear kit comes with mounting brackets that mount to the side of the frame encompassing the 2 mounting bolts for the rear bumper side mounting bracket.\u003c\/p\u003e\n\u003cp\u003eThere is some drilling required to add the remaining hardware to mount. The torsion bars are positioned above the frame rail, in the void space between the jack storage compartment and the rear toolbox\/sub-woofer compartment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManual Option\u003c\/li\u003e\n\u003cli\u003eThe arms come forward and linkage attaches to the same tab on the rear axle as the stock rear sway bar.\u003c\/li\u003e\n\u003cli\u003eThe front kit comes with aluminum brackets to mount SwayLOC in the stock sway bar location.\u003c\/li\u003e\n\u003cli\u003eSome aftermarket bumpers or skid plates might require modifications to allow clearance for SwayLOC.\u003c\/li\u003e\n\u003cli\u003eA multi-piece linkage kit is included to create a variety of linkage lengths to fit most lift heights from stock to over 10 inch.\u003c\/li\u003e\n\u003cli\u003eIf your Jeep is heavy, or have a rack on the roof, this will help drastically in controlling the body roll of the JK.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003cbr\u003e1. JK's with aftermarket rear bumpers that have mounting plates which use the same 2 mounting bolts on the side of the frame may need to be modified.\u003cbr\u003e2. JK's with Rubicon Express or other manufacturers aftermarket front track bar relocation brackets might interfere with the driver side SwayLOC arm, however the current version usually clears\u003cbr\u003e3. Rear SwayLOC requires 4.5 inch min backspacing or less\u003c\/p\u003e\n","brand":"Underdog Motorsports","offers":[{"title":"Default Title","offer_id":40105753837645,"sku":"SL-JKLV-combo-HZSF","price":1699.0,"currency_code":"USD","in_stock":true}],"url":"https:\/\/underdogmotorsports.com\/products\/jeep-jk-sway-bar-front-and-rear-combo-for-07-18-wrangler-jk-manual-option-swayloc-offroadonly","provider":"Underdog Motorsports ","version":"1.0","type":"link"}