Ram 1500 TRX & RHO Lift Kit Installation in San Tan Valley, AZ
Ram TRX & RHO builds for San Tan Valley drivers
San Tan Valley grew up around trucks. Out past Queen Creek, where the pavement gives way to desert and the San Tan Mountains sit right at the edge of town, a 702-hp TRX or a twin-turbo RHO isn’t a flex — it’s the right tool for how people out here actually drive. The catch is the distance to a shop that knows these trucks: it’s about 25–35 minutes up the Hunt Highway and Ironwood/Ellsworth corridor to reach us in Mesa, and it’s worth every mile to work with a crew that understands a factory Ram performance truck before anyone touches it.
A TRX or RHO leaves the factory as a long-travel desert machine, not a truck waiting on a lift kit. We build around that platform instead of fighting it — and every job leaves with a real alignment and never a spacer.
Why San Tan Valley TRX & RHO Owners Choose Underdog
- 400+ Five-Star Google Reviews
- 38+ Years of Off-Road Experience
- Authorized ICON, FOX, Bilstein, OME & King Installer
- Front & Rear Done Right — With Alignment
- No Spacer Lifts — Ever
- About 25–35 minutes from San Tan Valley — worth the drive
TRX & RHO Builds for How San Tan Valley Drives
San Tan Valley is the kind of place where the desert starts at the end of the street. Big lots, horse property, gravel county roads, and the San Tan Mountains Regional Park close enough that a Saturday run can begin on washboard and finish airing down for sand and whoops. A Ram TRX or RHO was built for exactly that — the problem is that too many shops look at one and reach for a leveling kit, and that’s the wrong instinct entirely. The 2021–2024 TRX runs the supercharged 6.2L Hellcat V8 making 702 hp; the 2025+ RHO swaps in the twin-turbo Hurricane inline-six. Both arrive as genuine desert trucks: a coil-over front end on remote-reservoir Bilstein Black Hawk e2 adaptive dampers, a 5-link coil-sprung rear, 35-inch tires, a widened track, and roughly a foot of wheel travel already engineered in.
So on these trucks a “lift kit” solves a problem that doesn’t exist. What actually makes a San Tan Valley TRX or RHO better is fitment and tire work — stepping up to 37s inside the known clearance and gearing limits — plus armor to survive the rocks between here and the San Tans, a tune and catch-can setup to keep the drivetrain happy through an Arizona summer, lighting for the drive back after dark, and Bilstein Black Hawk rebuild or re-valve service once the factory dampers fade from desert miles. We keep the long-travel geometry Ram engineered and build on top of it. That’s a completely different job than a base Ram 1500, which really is a leveling-and-lift truck — this is specialist work, and it’s the work we do every week.
A recent Ram 1500 build from our Mesa shop
A TRX and RHO are a different animal from a half-ton, but this Ram 1500 shows how we approach the platform. It came through our Mesa shop to be leveled right: we pulled the factory spacers and set it up on Bilstein 6112 shocks up front with Bilstein 5100s in the rear for a controlled, even ride.
To finish it, the truck runs an off-road front bumper, a clean set of black wheels, and BFGoodrich tires — a tougher stance and more trail readiness without giving up the daily-driver feel.
See the full build →What We Install on TRX & RHO
Suspension & Damper Service
We respect the factory long-travel setup — coil-over front, 5-link coil rear. The real work is Bilstein Black Hawk e2 rebuild, re-valve and tuning once desert miles wear them in, not bolting on a lift that fights the geometry.
Wheels & Tires
Stepping from the factory 35s up to 37s inside the TRX/RHO’s known clearance limits — mounted, balanced, and matched to the right offset so the widened body and fenders stay clean.
Armor & Bumpers
Rock sliders, skid plates and front and rear bumpers to protect a six-figure performance truck on the rocky two-tracks between San Tan Valley and the San Tan Mountains.
Lighting
Ditch lights, light bars and bumper-mounted pods wired in clean, so the long run home across the desert east of town after sundown is as lit up as the trail was.
Overland Setups
Bed racks, storage and recovery gear for the overland crowd, plus the tuning and catch-can work that keeps the supercharged Hellcat or the Hurricane turbos strong in Arizona heat.
Alignment
Included on every build. New 37s and added armor change how a TRX or RHO sits and tracks — we dial the alignment back in so it drives straight and wears its tires evenly.
San Tan Valley TRX & RHO FAQ
What suspension comes on a TRX or RHO from the factory, and what do owners change?
Both ship as long-travel desert trucks: a coil-over front end on remote-reservoir Bilstein Black Hawk e2 adaptive dampers, a 5-link coil-sprung rear, 35-inch tires and roughly a foot of travel. Owners don’t lift them — they add 37s, armor, lighting and tuning, and have the Bilstein dampers serviced as the miles add up.
What’s the biggest tire I can run on my TRX?
The TRX and RHO leave the factory on 35s, and 37s are the common next step within the known clearance and gearing limits. We fit them with the correct wheel offset and sort out any rubbing so the widened fenders and body stay clean.
Will 37s mean re-gearing my TRX or RHO?
Going from 35s to 37s is a modest jump, so many owners are fine on the factory gearing, but heavier armor, lots of towing or a noticeable drop in throttle response are the signs it’s worth a re-gear. We’ll tell you honestly whether your truck and how you drive it actually call for it.
How long does a TRX or RHO build take?
It depends on the scope. A tire-and-fitment or damper-service visit is usually a short job, while a full armor, lighting and tuning build runs longer and sometimes waits on parts. We’ll give you a realistic timeline and a quote before anything starts — just call.
How far is Underdog from San Tan Valley?
About 25–35 minutes. Most folks take Hunt Highway over to the Ironwood/Ellsworth corridor and up toward Power Rd to our shop at 1845 S Power Rd in Mesa, near Power & Baseline. It’s a longer drive than the closer suburbs, but our TRX and RHO customers tell us it’s worth it.
Is alignment included?
Always — it’s part of every install. New 37s and added weight change how the truck sits and tracks, so we re-set the alignment to keep it driving straight and wearing its tires evenly.
Build Your Ram TRX or RHO the Right Way
Rated 5.0 from 400+ Google reviews. 38+ years of off-road experience, honest advice, and no spacer lifts — ever. Tell us how your San Tan Valley TRX or RHO gets used and we’ll map out the tires, armor, tuning and service that actually move the needle.
Get Directions — from San Tan Valley, take Hunt Highway to Ironwood, then the Ellsworth/Power Rd corridor north to 1845 S Power Rd in Mesa.
Prefer to start with the platform overview? See our Ram 1500 suspension & lift hub in Mesa.